iBeam 350™

IP65

iBeam 350™

IP65

Bigger, bolder, brighter, and now weatherproof! Robe’s highly successful LEDBeam 350™ has arrived in its wet weather gear to deliver punch and presence, creating even more fast-sweeping beams and gorgeous washes outdoors.

Joining the Robe iSeries, the IP65-rated iBeam 350™ retains all the qualities and features of its highly successful indoor brother, the LEDBeam 350™. Our groundbreaking, self-managing, low-maintenance ingress protection technology allows outdoor use of this classic indoor wash fixture by removing the threat of rain, dust, humidity, smoke or haze damage, even in the harshest conditions.

As with other fixtures in the iSeries they maintain an identical DMX map, similar footprint, and minimal weight difference the iBeam 350™ and LEDBeam 350™ can used within the same lighting rig!

The onboard patented RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control. This active monitoring system automatically removes any moisture detected within the fixture, providing constant monitoring to ensure peak performance.

Outdoor fixtures need to operate in extreme cold. iBeam 350™ contains an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture´s sensors and communications channels remain active. When activated, POLAR+™ automatically maintains an internal temperature level, giving instant operability down to minus 50 degrees centigrade!

The iBeam 350™ runs a self pressure test and sensors automatically log when a cover was removed and replaced. This self-test, taking under 3 minutes, provides an error message if gaskets and covers were not replaced correctly or locking screws tightened, ensuring maximum protection.

Their lightweight aluminium alloy structure provides a dust-free environment for the optics. This eliminates the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even without power, directly from your mobile device using the Robe Com app. iBeam 350™ features a spectacular 3.8° to 52° zoom range and 7.800 lumen output from their 12 x 40W RGBW multichips with colour mixing available via CMY or RGB control.

For quick programming, our DataSwatch™ onboard colour library contains 66 premixed colours and tones, including whites, for fast, reliable colour selection. Robe’s advanced L3™ dimming software takes care of imperceptible fades to black.

Cpulse™, our highly respected Pulse Width Modulation control system, ensures the removal of any on-screen camera flicker, making iBeam 350’s eminently suitable for work with the most advanced cameras. Being exceptionally quiet due to the advanced cooling system and new super smooth zoom stepper motors, tungsten lamp emulation for 750W, 1.000W, 1.200W, 2.000W and 2.500W lamps, and a variable CTO from 2.700K to 8.000K, the fixture is ideal for noise sensitive areas.

Our REAP™ (Robe Ethernet Access Portal) allows access to fixture information and diagnostics over Ethernet Networks. Perfect for installations requiring remote centralised monitoring of fixture performance.

iBeam 350™ - Robe reliability in all weathers

Light source

12x 40 W RGBW LED multichips

Light output

7.800 lm, 31.500 lx @ 5 m

Zoom range

3.8° - 52°

Innovations

DataSwatch™ - inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures consists of up to 237 pre-programmed and calibrated colours and tones, allowing for rapid and accurate programming.

L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

RLCT™ - Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

Cpulse™ - Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency to ensure no flicker will be visible on any camera system.

Robe NFC controller and app

The Robe COM application is an app based on NFC (Near Field Communication). It can be either used to access to fixture’s settings of our NFC-based navigation display systems as well as reading out data of our TE™ Transferable Engines.

RAINS™ – Robe Automatic Ingress Protection System

The highly advanced patented RAINS™ (Robe Automatic Ingress Protection System) technology not only prevents ingress. It actively manages a fixture's internal microclimate removing internal moisture build-up caused by constant heating and cooling to provide maximum protection for electronics, revolutionising how outdoor fixtures are managed and protected.

POLAR+™

Outdoor fixtures need to operate in extreme cold. Therefore, Robe iSeries™ fixtures contain an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture's sensors and communications channels continue to function.

Product Video

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 12 x 40W RGBW multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Motorized exceptionally quiet zoom

Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

Extremely quiet operation suitable for all types of production in Theatre and TV

POLAR+™ for power saving and instant operation in extremely cold weather conditions

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding, NFC app controller

Protocols:

USITT DMX-512, RDM
ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance

DMX Protocol modes: 3

Control channels: 22, 16, 24

Pan & Tilt resolution: 16 bit

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Noise Levels

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Mounting adapter for one omega holder - black: 10980100

Mounting adapter for one omega holder - white: 10980129

Mounting adapter for one omega holder - neutral: 10980113

Daisy Chain powerCON TRUE1 In/Out, EU, 0,75m, Outdoor: 13052278

Daisy Chain powerCON TRUE1 In/Out, US, 0,75m, Outdoor: 13052279

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Outdoor: 13052280

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Outdoor: 13052281

Single Top Loader Case: 10120320

Quad Top Loader Case: 10120322

Foam Shell: 20020467

Legal

Related News

1.11.2024

Princess Cruises Chooses Robe for Groundbreaking Sun Princess ship - First in New Sphere Class

Princess Cruises has chosen Robe Lighting for its brand-new Sun Princess, the latest addition to the Princess fleet.

12.2.2024

Robe Imbibes the ISE Vibes

Robe lighting enjoyed the great vibes, brisk business, lively atmos and fantastic visitor numbers checking out the 2024 Integrated Systems Europe (ISE) expo at FIRA Barcelona, Spain.

25.1.2024

Robe at ISE 2024

Robe Lighting will exhibit on booths 1C700 and 1D700 in Hall 1 at the Integrated Systems Europe (ISE) expo 30th January to 2nd Feb February 2024 at Fira Barcelona in Spain, where it and sister businesses – Anolis, Avolites and Artistic Licence – will share a dynamic space and present an interesting array of new and popular products.

12.12.2023

A Powerful & Imaginative LDI for Robe

Robe enjoyed the buoyance of a busy year in North America at the 2023 LDI Conference and Tradeshow inside the new West Hall at Las Vegas Convention Center.